Specifications
Size
Each individual Polyview shutter can be manufactured up to a width of 3.6m or a total of 9 square metres. For larger openings the shutter can be fitted with any number of standard or corner mullions.
Bottom Rail
The bottom rail of the shutter is manufactured from an extruded aluminium section fitted with an extruded aluminium cover plate for added security and can also be used as a mid rail lock at any position in the door. The bottom rail foot comes in two options: as one extrusion with the bottom rail or a separate extrusion as a add on.
Locking
The bottom rail houses a keyed centre lock within the extrusion. This operates 25mm x 3mm aluminium flat bars which, when in the locked position, secure into the side guides on both sides of the opening. The standard locking position allows for double sided lock with operation from both inside
and out. Multiple doors can be keyed alike.
Side Guides
The guides are manufactured from an extruded aluminium section 50mm deep x 31mm wide. Optional felt brush available.
Mullions
Standard 180 degree mullions are manufactured from an extruded aluminium section 130mm deep x 31mm wide and shall be lift out types with shoot bolts to the base. Special wide mullions to suit any angle shall be fabricated with 1.6mm aluminium sheet securely fitted to our standard side guides for angle openings where doors need to be stacked
Brackets
Manufactured from slotted 90mm x 40mm mild steel.
Drum
The drum is manufactured from 200mm diameter spiral ducted tube attached to mild
steel wheels with fully enclosed ball bearings which rotate around a 34mm steel shaft
with next to no friction. The shaft shall be fitted with helical coil springs designed to counterbalance the curtain weight throughout its full operation.
Operation
Manual operation, simply push up and pull down with supplied pull pole. Doors
can be electrically motorised with various push button, remote control or key switch operation.
Finish
Clear anodised standard colour Powder coating as an option in Dulux powder
coat range.
Maverick Roller Products Pty Ltd is continually researching and developing its products and reserves the right to change specifications without notice.
|